MENU CART ({{currentCart.getItemCount()}}) MESSAGE

Pullman Tampers

Pullman Espresso Accessories is an Australian Company. All the tampers are manufactured in their base located in Adelaide, South

Australia. Each tamper is an individual craft work of art, measured, weighed and stamped with its own serial number. It is the most

functional and fashionable tamper in the market.

For enquiry or ordering, please contact us through 

E-mail : sales@coffeeengineering.com

Whatsapp : 5685 0696

 

Tamping Bases

Two kinds of tamping 

base are available:

BIG STEP

- Extremely high strength 630 Grade Stainless Steel

- 58.55mm base diameter

- 30g lighter than standard Pullman Barista Base

BARISTA BASE

- High strength 304 Grade Stainless Steel

- 58.4mm base diameter

- True Tamp rings to assist in achieving a level tamp

Colorful Spacers

Different colors of

spacer are available

for matching.

- Black/White/Red

  /Blue

- Golden/Silver
 
- Wooden

Adjustable Spacers

2mm, 5mm and 8mm

spacer's height can be

engaged. Barista can

adjust the most

comfortable height of

tamper for yourself. 

Ergonomics

Pullman specially

design the rubber on

piston to prevent

barista's fatigue of

the fingers after

continuing working.

 

Handle Selections

Different materials of handle can be selected

- Acetal Plastic

- Anodised Aluminium

- Powder Coasted Aluminium

- Hardwood (American Walnut or Checkerboard)

MARVEL & DC HEROES Series available

- Batman/Ironman/Superman/Spiderman/Captain America 

Personalized Design & Engraving

Design your own tamper!

Companies can make your logo on the top of the handle. 

The printing is special treated so that it will not fade.

You can also choose engraving your name or wordings on 

the top or side of the handle.

Cares & Maintenance

Tampers with acetal plastic or anodized aluminium handles are all impervious to boiling water and common cleaning agents so can

be washed or wiped as required. Do not clean in commercial dishwashers or any harsh or caustic chemical cleaners such as bleach or

caustic soda, and do not allow any chemicals to dry on the tamper. Tampers with wooden handles are pre-treated with Danish Oil and

will absorb skin oils during normal use so it should not need any re-oiling. If the handle gets dirty, a quick wipe with a damp cloth is

adequate, but do not allow wooden handles to get overly wet. If you find the wood is getting dry, a coat of wood oil, boiled linseed oil

or even Canola oil can be beneficial to the wood, but make sure you wipe it all off after a few minutes to ensure a dry, dust-free

surface. These oils are not as good as Danish Oil but they should work.

The base can be unscrewed for cleaning if you wish, however once again a wipe with a damp cloth will remove any dried coffee

residue